That English Guy
One day I'll be King!
Admiral
Registered: 02/10/06
Posts: 2510
Loc: Rochester, MN
Due to some additions to my garage I now find myself in the position where parking our trucks in the right place is crucial. So I thought of buying some of those wall mounted parking sensors and was wondering if any of you have them and do they work?
My other options were to mount a stop block on the floor or hang a tennis ball from the ceiling but when the trucks aren't in the garage you have a tripping hazard and need to constantly play dodge ball!
_________________________
Legal Alien livin' the American dream baby!
I hang a tennis ball from the ceiling which is good for determining how far to go in but I also need to make sure the boat is far enough back so i don't hit the tongue. I park the truck in front of the boat.
_________________________
My son thinks his name is "Cute as a button"
I use the parking block method. They are not fastened down so if you kick them they just slide out of the way and don't trip you. The floor is marked where they go so getting them back in the spot isn't a problem. I have four cars and the boat in there and it works just fine. I hate the tennis balls hanging around, tried it for a while, like the blocks much better.
_________________________
Take care, Chris 06 Monterey 248 LS
She pulls her car in, and watches that laser flashing on her hood, and stops once it hits a predetermined spot on her dashboard. Perfect park, every time.
I have to back my Durango in to make it fit, and make sure I can open my door to get out. I back it in until my passenger side mirror is back to a certain point on a garage cabinet, then I stop. If I go a few inches to far, my trailer hitch receiver would go through the wall. Hasn't happened yet!
MarkS
Admiral
Registered: 12/01/03
Posts: 2422
Loc: Michigan
I've used the tennis ball method (currently on my wife's side of the garage) and the parking rubber mat http://www.sportsimportsltd.com/garparmatbum.html I used the rubber mat for the Navigator. Both the ball and the mat were positioned near the wall and never got in the way or became a hazard in the garage.
Currently the truck is backed in until the rear bumper touches the wall this gives 1.5 inches in front of the bumper for the garage door to shut (really tight). It helps to have backup sensors o nthe truck.
Registered: 07/10/06
Posts: 1412
Loc: Eastern Washington
I raised the door sensors to bumper hight. Not far enough in, door won't close. Of course in a few years when my kids give me grandkids I may have to re-think that plan but it works great for now.