Your On-Line Port'o'Call
Topic Options
Rate This Topic
#478962 - 02/08/10 02:18 PM Want two project boats to work on???
GoFirstClass Offline
Boating Bum

Registered: 11/21/03
Posts: 9909
Loc: Pasco, WA
From our Craigslist. These two Chriscraft's need a bit of buffing and polishing but they could be in the water in no time.....

"One 1949 Chriscraft Sedan 33' with twin 6 cyl. Chrysler Crown engines, no trailer, needs work $6,000 or best offer and One 1949 Chriscraft Commandor 34' with twin 318 Chrysler with 2:56 velvet drives and 21 X 19 SS props, no trailer, needs work $6,000 OBO both sitting for a few years interested call 1-509-586-8310 or 1-509-308-2059"



I would bet that you could set up a direct transfer of money from your savings account to a hole in the ground and in nothing flat you could have these two beauties in good working order and your savings account completely drained. eek eek
_________________________
"Beachcomber", 1995 Sea Ray 550 Sedan Bridge, and "Cool Change" 89 Reinell 19'er...

I just want to go boating!

Top
Sponsered Ad
#478967 - 02/08/10 03:24 PM Re: Want two project boats to work on??? [Re: GoFirstClass]
2Suns Offline
Admiral

Registered: 09/17/06
Posts: 1813
Loc: Peoria,IL
I see what you're getting at GFC. It wouldn't be for me.

But if the wood is good, it might be worth something to someone? idn
_________________________
By the time they had diminished from 50 to 8, the other dwarves began to suspect "Hungry.”-Gary Larson

Top
#478971 - 02/08/10 05:01 PM Re: Want two project boats to work on??? [Re: 2Suns]
prober Offline
Admiral

Registered: 07/10/06
Posts: 2402
Loc: Eastern Washington
Probably only cost a couple hundred thousand apiece to fix them up.

I guess they might be usefull as patterns to build replacement boats after but it seems like it would be much easier to just start over.

Top
#478972 - 02/08/10 05:36 PM Re: Want two project boats to work on??? [Re: prober]
GoFirstClass Offline
Boating Bum

Registered: 11/21/03
Posts: 9909
Loc: Pasco, WA
I"m thinking they'd make good kindling. There may be some old nautical stuff on board that might be cool to have but that'd be about it.
_________________________
"Beachcomber", 1995 Sea Ray 550 Sedan Bridge, and "Cool Change" 89 Reinell 19'er...

I just want to go boating!

Top
#478975 - 02/08/10 06:55 PM Re: Want two project boats to work on??? [Re: GoFirstClass]
SNUPY Offline
Vice Admiral

Registered: 03/11/09
Posts: 412
Loc: Northern Ca
Went to a lien sale last year, there was a 1949 Chris craft think it was 42-44' could have purchased for $1.00!! It was still in the water in a covered slip. Did not sell even for a dollar! The ole salts were saying put $70 - 120,000.00 in it, you will have a great boat!!
_________________________
George
2008 Reinell 220 LSE
Slow like a Pro... Not fast like an A$$




Top
#478986 - 02/08/10 09:12 PM Re: Want two project boats to work on??? [Re: SNUPY]
FreshWaterLover Offline
Admiral

Registered: 10/22/09
Posts: 1690
Loc: Donovan, IL
Rotf @ in the water in no time... sure but they didn't say they'd float. I don't know anything about boats overall, but I know those boats ain't worth 6 grand a piece.
_________________________
Tami
As of 11/23/09 a Crownline 250CR owner!!

Top
#478987 - 02/08/10 09:36 PM Re: Want two project boats to work on??? [Re: SNUPY]
SALTY_DAWG Offline
Vice Admiral

Registered: 07/25/09
Posts: 485
Loc: Lincolnshire, IL
The truth is that as a restoration project of a classic antique wooden boat these boats don't appear to be in bad shape. However that year and model of Chris Craft boat is not considered a desirable antique collectible in my opinion. Bottom line is that even if someone spent thousands of dollars to get one in shape it still wouldn't be worth the asking price.
_________________________

Top
#478990 - 02/08/10 10:44 PM Re: Want two project boats to work on??? [Re: SNUPY]
etyppo Offline
Admiral

Registered: 06/25/07
Posts: 977
Loc: Northern California
Originally Posted By: SNUPY
Went to a lien sale last year, there was a 1949 Chris craft think it was 42-44' could have purchased for $1.00!! It was still in the water in a covered slip. Did not sell even for a dollar! The ole salts were saying put $70 - 120,000.00 in it, you will have a great boat!!



Was that up at Perry's? There were a lot of old abandoned looking boats up there before the new owner took over.
_________________________
2006 Cobalt 263 Mercruiser 8.1

Top
#478994 - 02/08/10 11:17 PM Re: Want two project boats to work on??? [Re: etyppo]
SNUPY Offline
Vice Admiral

Registered: 03/11/09
Posts: 412
Loc: Northern Ca
Yes it was...could have purchased several different boat for a buck that day!!! There were 4 or 5 that good deals, but the best two out of the bunch, the people caught up on their slip fees, so were pulled from the sale.
_________________________
George
2008 Reinell 220 LSE
Slow like a Pro... Not fast like an A$$




Top
#478996 - 02/09/10 05:52 AM Re: Want two project boats to work on??? [Re: SNUPY]
WaterMutt Offline
Bilge Rat

Registered: 01/14/04
Posts: 11335
Loc: Massachusetts
in the water, under the water, it's all semantics...

Looks like two fine original Chris Craft submersibles right there, pretty rare to see them above water (usually don't come back up).
_________________________
"That's my boat..."
-Forest Gump


Top
#479006 - 02/09/10 08:39 AM Re: Want two project boats to work on??? [Re: WaterMutt]
Frantically Relaxing Offline
Play It Forward

Registered: 02/07/03
Posts: 8520
Saw that one shop (?) on TV pay 4 grand for a rusted out '69 camaro body -JUST the body- ... after a few months hard labor they still made about 14 grand at the auction... so who knows?
_________________________

Hello. My name is Kevin. And I'm addicted to boats.

Top


Moderator:  Admin, Finger Lakes Boater, Opus 
Google Search
 
Who's Online
3 registered (kenhdog, Titanium, trooplewis), 5 Guests and 4 Spiders online.
Key: Admin, Global Mod, Mod
Newest Members
juice, kjsAZ, Lil_Pint, litrausa, SureShade
4490 Registered Users
September
Su M Tu W Th F Sa
1 2 3 4
5 6 7 8 9 10 11
12 13 14 15 16 17 18
19 20 21 22 23 24 25
26 27 28 29 30
New Topics
Our Labor Day.
by Silverbullet
Yesterday at 10:00 PM
Did FR get out on the boat over Labor Day weekend?
by Ladybugskater
Yesterday at 06:28 PM
engine drives and trim question
by FreshWaterLover
Yesterday at 06:22 PM
Our Labor Day 2010
by FreshWaterLover
Yesterday at 01:38 PM
Malco Leather and Plastic Cleaner
by Silverbullet
Yesterday at 09:48 AM
2 short videos from today
by FreshWaterLover
09/05/10 07:36 PM
Water source for transom shower and washdown pump
by Titanium
09/05/10 06:50 PM
Freddie and Ernie's cousin Brennan
by etyppo
09/04/10 09:11 PM
Larger tires on trailer
by kjsAZ
09/04/10 04:39 PM
Small Town & Friday Night Lights
by Lambert Laker
09/03/10 10:37 PM
Forum Stats
4490 Members
27 Forums
33368 Topics
496733 Posts

Max Online: 162 @ 04/30/07 11:57 AM